1-Channel RTD Input Module (ADAM-4013-DE)
by Advantech
•Part #: ADAM-4013-DE
View Detailed Description
$170.00
Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC .
- Built-in Watchdog Timer
- Isolation Voltage 3000 VDC
- Sampling Rate 10 sample/sec
- Accuracy +/- 0.1% or better
| Analog Input | Channels | 1 (2, 3, or 4-wired) |
| Direct Sensor Input | RTD (Pt, or Ni) | |
| Sampling Rates | 10 samples/second | |
| Resolution | 16-bit | |
| Input Impedance | 2 MOhm | |
| Span Drift | ±25 ppm/°C | |
| Zero Drift | ±3 µV/°C | |
| CMR @ 50/60 Hz | 150 dB | |
| NMR @ 50/60 Hz | 100 dB | |
| Display | LED Indicators | Power |
| General | Watchdog Timer | System (1.6 second) |
| Connector | 1 x plug-in terminal block (#14~22 AWG) | |
| Temperature (Operating) | -10~70 °C (14~158 °F) | |
| Humidity | 5~95 %RH | |
| Temperature (Storage) | -25~85 °C (-13~185 °F) | |
| Interface | RS-485 | |
| Isolation Protection | 3000 VDC | |
| Communication Protocol | ASCII command | |
| Communication Speed | Serial: From 1,200 to 115.2 k | |
| Comm. Distance | Serial: 1.2 km | |
| Data Flow Control | Yes | |
| Power Supply | Power Requirement | 10~30 VDC |
Be the first to review this product!