L-Tron

The PCI-1713 is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 100 KS/s, 12-bit resolution and isolation protection of 2500 VDC.

Main Features

• 2500 VDC isolation protection
• 32 single-ended or 16 differential analog inputs, or a combination
• 12-bit resolution for A/D conversion
• Up to 100 kS/s sampling rate for A/D conversion
• Programmable gain for each input channel
• On-board 4 K samples FIFO buffer
• S/W, internal or external pacer triggering supported

Analog Input

• Channels 32 single-ended or 16 differential (software programmable)
• Resolution 12-bit
• Onboard FIFO 4K samples
• Input Range Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V (software programmable) Unipolar: 0 ~10 V, 0 ~ 5 V, 0 ~ 2.5 V, 0 ~ 1.25 V
• Maximum Input ±30 V Overvoltage
• Common Mode Gain CMRR Rejection Ratio(CMRR) 0.5, 1 75dB 2 80dB 4 84dB 8 84dB
• Maximum Sampling 100 kS/s Rate
• Accuracy Gain Accuracy (depends on gain) 0.5, 1 0.01% of FSR±1LSB 2 0.02% of FSR±1LSB 4 0.02% of FSR±1LSB 8 0.04% of FSR±1LSB
• Linearity Error ±1 LSB
• Input Impedance 1 GΩ
• Trigger Mode Software, on-board programmable pacer or external (TTL level)

Programmable Pacer

• Timer 32-bit programmable time
• Time Base 10 MHz PCI-1713
• 2500 VDC isolation protection32 single-ended or 16 differential analog inputs, or a combination
• 12-bit resolution for A/D conversion
• Up to 100 kS/s sampling rate for A/D conversion
• Programmable gain for each input channel
• On-board 4 K samples FIFO buffer
• S/W, internal or external pacer triggering supported 100 kS/s, 12-bit, 32-ch, Isolated Analog Input Card

General

• I/O Connector 37-pin D-type female connector
• Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
• Power Consumption +5 V @ 850 mA (Typical), +5 V @ 1.0 A (Max.)
• Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
• Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
• Operating Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3)